2100 MN-65, Mora, MN 55051(763) 219-2140
Central Minnesota Outdoors logoCentral Minnesota OutdoorsMora, MN

Crown Royal Wood Boilers

Outdoor boilers and a full line of parts.

We supply the Pristine and Multi Pass series outdoor boilers plus installation and replacement parts. Delivery options available — installation is left to your contractor.

What we supply

  • Pristine series gasification wood boilers
  • Multi Pass series outdoor boilers
  • Installation parts and the full line of replacement parts
  • Delivery options to your farm, shop or job site

What we don't do

  • No installation, plumbing or electrical work
  • No system design or site visits for sizing
  • Your installer or contractor handles the hook-up

Most trusted

What makes these the most trusted outdoor boilers on the market?

American Made

Built with domestic stainless steel in International Falls, Minnesota.

Superior Materials

409 Titanium Enhanced Stainless Steel — corrosion resistant, handles high heat and transfers heat well. The best choice for outdoor furnaces.

20-Year Limited Warranty

Not all warranties are equal. The 20-year limited warranty is some of the longest-lasting coverage on the market — always ask to see the full warranty.

Support After the Sale

A family-owned manufacturer with customer service and technical support after you buy.

Pristine series outdoor boiler

7200E / 7300E / 7400E

Pristine

Burn up to 60% less wood than a conventional boiler.

Using negative pressure, this line of down-draft gasification furnaces is built from 409 Titanium Enhanced Stainless Steel. The Pristine is one of the most economical and energy-efficient models on the market, reaching 99% combustion efficiency — virtually smokeless. Its heat exchanger cleaner is the only self-cleaning system on the market that's easy to reach from the front.

Burns up to 60% less wood

99% combustion efficiency

Easy-to-use controls

On the outside

Stainless steel flue
Class A insulated chimney. Flue exhaust as low as 280°F, compared with 800–1,000°F on conventional units.
Rear access swing door
Fully removable swinging rear door for easy access and inspection.
Firebox door
Extra-large insulated door for easy loading, with the roller latch door system.
Secondary combustion chamber door
Wide insulated door for cleaning the secondary combustion chamber.

On the inside

Insulated heat exchanger doors
Large insulated door for easy cleaning of the heat transfer tubes.
Secondary combustion chamber
Reaches temperatures as high as 2,300°F.
Air delivery panels
Spread preheated outside air evenly through the firebox.
Gasification manifold
High-temperature poured refractory that injects preheated air right at the combustion zone.
Heat transfer tubes & twisted tape turbulators
Stainless turbulators placed in the water reservoir for high efficiency and low emissions.
Roller latch door system
Roller latch door system
Air panels & gasification manifold
Air panels & gasification manifold
Secondary combustion chamber
Secondary combustion chamber
Twisted tape turbulators
Twisted tape turbulators
Back access panel
Back access panel

Pristine series comparison

Model7200E7300E7400E
Estimated weight1,950 lbs.2,650 lbs.2,950 lbs.
Size (W x L x H)48″ x 74″ x 78″50″ x 79″ x 87″53″ x 85″ x 93″
Firebox length28″32″36″
Chimney size6″6″8″
Firebox door size (L x H)18″ x 18″20″ x 24″22″ x 26″
Supply / return size(1) 1¼″(2) 1¼″(2) 1¼″
Water capacity180 gal.235 gal.290 gal.
Combustion fan3,000 RPM3,450 RPM3,450 RPM
Approximate heating area*2,000–3,000 sq. ft.4,000–5,000 sq. ft.8,000–10,000 sq. ft.
Approximate BTUs125,000221,000325,000
Insulation roof / wallsR30R30R30
409 stainless steelYesYesYes
Domestic coil 300,000 BTUNoNoNo
EPA certifiedYesYesYes

*Heating area will vary based on climate, building design and insulation levels.

Multi Pass series outdoor boiler

7200MP / 7300MP / 7350MP / 7400MP / 7500MP

Multi Pass

Built with a triple-pass, water-filled heat exchanger for higher efficiency.

The triple-pass water-filled heat exchanger and water-filled tubes give the highest efficiency of a conventional outdoor furnace — burning 20–40% less than the competition. Every unit also has a turbo draft fan, shaker grates and a removable ash pan.

Simple & easy maintenance

Burns up to 40% less fuel

409 Titanium Enhanced Stainless

On the outside

Stainless steel flue
Class A insulated chimney.
Heat exchanger cleanout door
Easy access for cleaning fly ash, with a double safety latch handle.
Firebox door
Extra-large insulated door for easy loading, with the roller latch door system.
Ash pan door
Extra-large removable ash pan for easy cleaning.

On the inside

Triple-pass water-filled heat exchanger
Better heat transfer and higher efficiency than conventional units.
Turbo draft system & blower
Makes sure your fuel burns completely and helps clear ash.
Primary combustion air blower
Feeds air under the shaker grates for a hotter, cleaner burn.
Ash pan
Extra-large and removable for easy cleaning.
Cast iron shaker grates
Help burn fuel completely and drop the ash.
Turbo draft system & tubes
Turbo draft system & tubes
Heat exchanger
Heat exchanger
Cast iron shaker grates
Cast iron shaker grates
Ash pan
Ash pan
Control panel
Control panel
Back access panel
Back access panel

Multi Pass series comparison

Model7200MP7300MP7350MP7400MP7500MP
Estimated weight1,980 lbs.2,310 lbs.2,710 lbs.3,210 lbs.3,760 lbs.
Size (W x L x H)40″ x 66″ x 78″40″ x 70″ x 78″40″ x 70″ x 84″40″ x 75″ x 84″40″ x 80″ x 84″
Firebox length24″29″29″34″39″
Chimney size6″6″6″6″6″
Firebox door size (L x H)22″ x 23″22″ x 23″22″ x 23″22″ x 23″22″ x 23″
Supply / return size2″2″2″2″2″
Water capacity230 gal.310 gal.360 gal.440 gal.550 gal.
Approximate sq. ft.Up to 5,000Up to 7,500Up to 8,750Up to 10,000Up to 12,500
Approximate BTUs200,000300,000350,000400,000500,000
Insulation roof / wallsR-24 / R-21R-24 / R-21R-24 / R-21R-24 / R-21R-24 / R-21
409 stainless steelYesYesYesYesYes
Domestic coil 300,000 BTUOptionalOptionalOptionalOptionalOptional
EPA certifiedNoNoNoNoNo

Installation parts

Everything for a complete install, in one place.

A good outdoor furnace setup takes more than the furnace. We can supply the tubing, heat exchangers, pumps, chimney and treatment your installer needs.

Air Handlers

Turn hot water from your furnace into forced-air heat using new or existing ductwork.

Unit Heaters

Fast forced-air heat for garages, shops, greenhouses and other spaces.

Underground Tubing

Insulated tubing that carries heat between furnace and building with minimal loss.

Water-to-Air Heat Exchangers

Stainless or titanium options for pools, hot tubs and specialty applications.

Brazed Plate Heat Exchangers

For domestic hot water and in-floor radiant heat.

Tube & Shell Heat Exchangers

Stainless or titanium for pools, hot tubs and other water heating.

Chimney Caps

Stainless caps that stop downdrafts and keep rain and snow out.

Circulation Pumps

Taco and Grundfos pumps that move water from the stove to your home.

Class-A Insulated Chimney

Selkirk Ultra Temp chimney extensions, backed by a limited lifetime warranty.

Water Treatment

Control Chemical helps prevent corrosion, scale buildup and early wear.

Replacement parts

Keep your boiler running.

We carry the full parts line for both series. Call with your model number and we'll find the right piece and get it to you.

  • Gaskets, door seals and refractory
  • Blower motors, fans and actuators
  • Digital control panels and wiring
  • Cast iron grates and ash pans
  • Door latches, hinges and handles
  • Cleanout doors, chimney sections and bands
Outdoor boiler replacement parts on a workbench

Boiler, parts or delivery question?

Call Dan at (763) 219-2140 or email dan@mnhardware.com — we'll tell you what we have and how to get it to you.